


Domat Control System s.r.o.
Member: Yes
Address:
U Panasonicu 376
CZ 530 06 Pardubice, CZECH REPUBLIC
Phone: +420 461 100 823
Fax: +420 226 013 092
Web Site: www.domat.cz
Contact:
Email: info@domat.cz
Description:
Domat Control System manufactures software and hardware for building controls and energy monitoring and control systems: I/O modules, communicative room controllers, room units, programmable process stations (PLC/PAC), interfaces and converters, HMI panels, SCADA and management software. Since 2008, Domat has also provided open systems for monitoring and control of photovoltaic plants, with drivers for numerous PV inverters. The main features of the system are flat topology, openness for integration, and easy engineering.
Product Name | Type | Connectivity | Product Description |
---|---|---|---|
M090 Modbus TCP/DALI converter | Network Gateway | Modbus TCP | M090 is a serial converter which acts as a Modbus TCP server (accepts Modbus TCP commands) and controls a DALI (Digital Addressable Light Interface) bus with up to 60 DALI devices. It also incorporates a web interface for manual entering of DALI commands inclusive bus configuration and diagnostic commands. |
UC200 Room thermostat/temperature controller | Controller | Modbus RTU | UC200 is a communicative room heating and cooling controller with two binary inputs, two PWM outputs and a room sensor for control of a radiator or electrical heater and chilled ceiling. It is part of the UC... family with various I/O configurations. The controller is easy to operate with a turn/push button and features a legible 60 x 60 mm LCD display and a weekly time scheduler with RTC |
UC150 Room thermostat/temperature controller | Controller | Modbus TCP | UC150 is a communicative room heating controller with one PWM output and a room sensor for control of a radiator or electrical heater. The controller is easy to operate with a turn/push button and features a legible 60 x 60 mm LCD display and a weekly time scheduler with RTC. |
UI091 Room unit with CO2 sensor | Misc. Hardware | Modbus RTU | The room unit with CO2 sensor contains temperature sensor, NDIR CO2 sensor for carbon dioxide concentration measurement, optional humidity sensor, and control knob for setpoint control and other settings. The binary output is controlled either on a remote basis, or as thermostat, hygrostat or CO2 controller. |
ECIO2 I/O Module with Modbus RTU/TCP Router | I/O Module | Modbus RTU, Modbus TCP | The ECIO2 multiple I/O compact module contains I/O mix optimized for HVAC and home control applications. The module uses Ethernet (Modbus TCP) for communication with PLC, and RS485 (Modbus RTU) bus as link to optional extension RS485 I/O modules, and can be easily integrated in a variety of supervision and control systems. |
SoftPLC Runtime with OPC server | Software - OPC | Modbus RTU, Modbus TCP | The SoftPLC runtime provides tenths of drivers incl. Modbus RTU Client and Modbus TCP Client. The read variables may be further processed in a FUPLA logic incl. PI controllers and other analogue functions, and then written back to the Modbus servers, or communicated over an OPC server to a SCADA. It works also as a protocol converter and integrator. |
Copyright © 2005-2019 Modbus Organization, Inc. PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor agreement and privacy policy.