Babel Buster BB2-6010 is a Modbus to Modbus and a Modbus to SNMP Gateway. The BB2-6010 is more than a protocol translator. It is a self contained server that collects and distributes data according to the rules you create. The most common use of the BB2-6010 is to map Modbus RTU and/or Modbus TCP devices to SNMP. The SNMP manager can use SNMP Get to retrieve contents of any mapped Modbus register. The BB2-6010 generates SNMP Traps upon sensing of alarm conditions.
Modbus RTU, Modbus TCP
Modbus RTU RS-485 Master or Slave; Modbus TCP Client and Server; Modbus TCP over Ethernet 10/100BaseT; SNMP get/set access to all data points; SNMP trap generation, user programmable criteria; 1000 16-bit registers (300 useable for SNMP); 500 32-bit floating point registers (100 useable for SNMP); Supports Modbus "coils", input registers, holding registers; Single/double, signed/unsigned, and IEEE 754; Modbus register mapping configured via web interface; Modbus register scaling (x10, x100, x0.1, x0.01, etc.); Modbus (master) polling interval configurable per point; User-defined "virtual device" register map; Supports user HTML wrapper; Configure via web pages; Flash file system with XML configuration files; Online help; Password protection for web log-on and ftp; Field upgradeable firmware upload via ftp; DHCP or static IP address; Hardened EIA-485 transceiver for Modbus RTU; Optional RS-232 transceiver (in place of RS-485); Powered by 10-30VDC or 12-24VAC 50/60 Hz; Power Consumption: 0.3A @ 24VDC; DIN rail mounting, 100mm H x 70mm W x 60mm D; Pluggable screw terminal block for power & RTU network; Operating temperature -40°C to +85°C; Humidity 5% to 90%; FCC Class A, CE Mark; Listed to UL 916 and (Canadian) C22.2 No. 205-M1983.
See attached spec. sheet.