Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
Intelligent humidity, temperature and dew point probe with Ethernet interface.
Ethernet sensor is designed to measure temperature, relative humidity and dew point. Probe contains control circuitry in a durable plastic case and T+RH sensors on a cable with a bronze sintered filter. Large dual-line LCD for simultaneous display of temperature and relative humidity, or dew-point temperature is an advantage. Display can be switched off. Capacitive polymer sensor ensures excellent calibration long-term stability, inertia against water and condensation. Humidity transmitter designed for use in non-aggressive environment. Modbus protocol enables measurement of values, setting alarm limits, adjusting probe, reading firmware version.
Accuracy of relative humidity measurement: ?2.5% relative humidity from 5 to 95% at 23?C; Accuracy of temperature measurement: ?0.4?C; Accuracy of dew-point temperature output: ?0.5?C from 30 to 95% RH (calculated from temperature and RH) ; Temperature operating range of case with electronics: -30 to +80?C; Protection: IP20 electronics, IP40 sensors; LAN connection: RJ-45 connector; Power: 9-30Vdc, maximum consumption 200mA
Copyright © 2005-2019 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor