The MGate 5105-MB-EIP is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and EtherNet/IP network communications. To integrate existing Modbus devices onto an EtherNet/IP network, use the MGate 5105-MB-EIP as a Modbus client or server to collect data and exchange data with EtherNet/IP devices. The latest exchange data will be stored in the gateway as well. The gateway converts stored Modbus data into EtherNet/IP packets so the EtherNet/IP scanner can control or monitor Modbus devices.
Modbus RTU, Modbus TCP
Protocol conversion between Modbus and EtherNet/IP; Supports EtherNet/IP Scanner/Adapter; Supports Modbus RTU/ASCII/TCP master/client and slave/server; Effortless configuration via web-based wizard; Built-in Ethernet cascading for easy wiring; Embedded traffic monitoring/diagnostic information for easy troubleshooting; microSD card for configuration backup/duplication and event logs; Status monitoring and fault protection for easy maintenance; -40 to 75°C wide operating temperature models available; Serial port with 2 kV isolation protection; Supports redundant dual DC power inputs and 1 relay output; Security features based on IEC 62443
EtherNet/IP type: Adapter; EtherNet/IP IO data size: Input 496 bytes, Output 496 bytes; Modbus TCP type: Client/Server (supports 16 TCP clients or 32 TCP servers connections);
Modbus serial type: RTU/ASCII Master/Slave; Number of Ethernet ports: 2 (1 IP); Speed: 10/100 Mbps, auto MDI/MDIX; Connector: 8-pin RJ45; Magnetic isolation protection: 1.5 kV built-in;
Serial standards: RS-232/422/485, software selectable; Serial connectors: DB9 male; RS-485 Data Direction Control: ADDC® (automatic data direction control);
Power input voltage: 12 to 48 VDC; Power input current: max. 455 mA; Certifications: CE, FCC, UL, C1D2, ATEX, IECEx; Warranty period: 5 years