The MGate 5118 gateways support the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments.
Modbus RTU, Modbus TCP
Protocol conversion between J1939 and Modbus/PROFINET/EtherNet/IP; Supports Modbus RTU/ASCII/TCP master/client and slave/server; Supports EtherNet/IP Adapter; Supports PROFINET IO device; Supports J1939 protocol; Effortless configuration via web-based wizard; Built-in Ethernet cascading for easy wiring; Embedded traffic monitoring/diagnostic information for easy troubleshooting; microSD card for configuration backup/duplication and event logs; Status monitoring and fault protection for easy maintenance; CAN bus and serial port with 2 kV isolation protection; -40 to 75°C wide operating temperature models available; Security features based on IEC 62443
PROFINET type: IO Device; PROFINET IO data size: Input 512 bytes, Output 512 bytes; EtherNet/IP type: Adapter; EtherNet/IP IO data size: Input 496 bytes, Output 496 bytes;
Modbus TCP type: Client/Server (supports 16 TCP clients or 32 TCP servers connections); Modbus serial type: RTU/ASCII Master/Slave; CANbus type: SAE J1939; Number of Ethernet ports: 2 (1 IP);
Speed: 10/100 Mbps, auto MDI/MDIX; Connector: 8-pin RJ45; Magnetic isolation protection: 1.5 kV built-in; Serial standards: RS-232/422/485, software selectable;
Serial connectors: DB9 male; RS-485 Data Direction Control: ADDC® (automatic data direction control); Power input voltage: 12 to 48 VDC; Power input current: max. 416 mA; Certifications: CE, FCC, UL, C1D2, ATEX, IECEx;
Warranty period: 5 years