Back to Company
A communicative motion and light sensor, DIP200 detects motions and light intensity. Applicable for control of lighting, heating, and ventilation on an as-needed basis.
Infrared motion sensor (binary value) and a light sensor (2 - 3000 lx); Measured values are read via Modbus RTU from respective registers (see Modbus table DIP200); Sensor versions DIP200-F with protection lens are intended for operating in a normal and chemically non-aggressive environment (standard delivery) and do not need any servicing or maintenance and can be mounted in any position. Sensor versions type DIP200-W with lens are resistant against air humidity and water spray from the lens side (see datasheet domat_STELIX_DIP200_installation). The sensors are mounted with different types of supplement. Standard type included in delivery is R. Other type must be specified in order (see datasheet see datasheet domat_STELIX_DIP200_installation to select the suitable fixture). Cover lenses are specific for different montage heights and detection angles. Standard type included in delivery is D. Other types must be specified (see datasheet STELIX_DIP200_lens to select the suitable lens type).
See attached spec. sheet.
Copyright © 2005-2022 Modbus Organization, Inc.
800 Federal St., Andover, MA 01810. All rights reserved.
By using Modbus.org, you accept the terms of our visitor