The FS1021 cable transducer registers the temperature in gaseous media and converts this measured value into a digital output signal. Using the mounting flange, the temperature transducer is fastened, for example, directly to the duct, container etc. and can be quickly and easily be replaced during service.
Measurement range temp.: -30 - +150° C; Accuracy: +/-0,2 K + max. +/-1% mv (-30 - +100° C), else +/-0,3 K + max. +/-1,5% mv; Offset: can be entered in the register; Sensor: Pt100 DIN EN 60751 Cl. B; Supply voltage: 24 V DC (+/-5%); Current consumption: max. 20 mA + 30 mA (option display) + 20 mA (option relay); Digital output: Modbus RTU; Alarm output: 1 x potential-free change-over contact, 48 V, 1 A; Switching Hysteresis Relay: can be entered in the register; Electrical connection: push-in terminal, no tools required, time-saving; Housing: Polycarbonate PC UL 94 V0 with hinge locks, color signal white similar to RAL 9003; Cable gland: PG11 high-strength cable gland with strain relief; Display: optional LCD display with backlight on/off/auto; Material: Protection sleeve: stainless steel VA 1.4571; Dimensions: Housing: L 89 x W 80 x H 47 mm, Protection sleeve: 6 mm; Protection type: IP65; Protection class: III; Working range r.H.: 0 - 98% r.H. in contaminant-free, non-condensing air; Working temperature: Probe: -30 - +150° C, Electronic: -20 - +70° C; Storage temperature: -20 - +70° C; Installation: mounting flange (in scope of delivery); Approvals: CE, EAC, RoHS
See attached spec. sheet.