The FS1022 screwable transducer registers the temperature at a maximum pressure of 16 bar in gaseous and liquid media and converts this measured value into a digital output signal. Using the immersion sleeve, the temperature sensor is screwed directly into the container or the pipeline and can during service be quickly and easily replaced.
Measurement range temp.: -30 - +150° C; Accuracy: ±0,2 K + max. +/-1% mv (-30 - +100° C), else +/-0,3 K + max. +/-1,5% mv; Offset: can be entered in the register; Sensor: Pt100 DIN EN 60751 Cl. B; Supply voltage: 24 V DC (+/-5%); Current consumption: max. 20 mA + 30 mA (option display) + 20 mA (option relay); Digital output: Modbus RTU; Alarm output: 1 x potential-free change-over contact, 48 V, 1 A; Switching Hysteresis Relay: can be entered in the register; Electrical connection: push-in terminal, no tools required, time-saving; Housing: Polycarbonate PC UL 94 V0 with hinge locks, color signal white similar to RAL 9003; Cable gland: PG11 high-strength cable gland with strain relief; Display: optional LCD display with backlight on/off/auto; Material: Protection sleeve: stainless steel VA 1.4571, Immersion sleeve: brass nickel-plated, Pmax. 16 bar; Dimensions: Housing: L 89 x W 80 x H 47 mm, Protection sleeve: 0 6 mm, Immersion sleeve: outside 0 8 mm / inside 0 6,5 mm, thread R1/2 inch; Protection type: IP65; Protection class: III; Working range r.H.: 0 - 98% r.H. in contaminant-free, non-condensing air; Working temperature: Probe: -30- +150° C, Electronic: -20 - +70° C; Storage temperature: -20 - +70° C; Installation: immersion sleeve with R1/2 inch screw-in thread; Approvals: CE, EAC, RoHS
See attached spec. sheet.