The 5204-MNET-PDPMV1 stand-alone DIN-rail mounted protocol gateway provides one Ethernet port and PROFIBUS DP Master configurable DB-9F port. The Modbus TCP protocol driver can interface many different protocols into Schneider Electric Quantum processors as well other devices supporting the protocol. Supports both Client and Server connections, and when coupled with the Web option provides a web/ftp interface as well. The PROFIBUS DP Master protocol driver supports complete Master specifications according to IEC 61158 on either a Mono-Master or Multi-Master network. The module supports the DPV1 specification.
The MNET-PDPMV1 modules are an ideal solution for the many applications where Modbus TCP connectivity can be used to integrate a PROFIBUS DP slave device into a system; Designed with both Client and Server support; In combination with the PROFIBUS DP V1 Master device support, the module provides a powerful interface to the many PROFIBUS slave devices in use in the industrial marketplace today; Applications found in most industries, especially Manufacturing, Oil and Gas, Electrical Power and Food Processing.
Power Supply: 24 VDC nominal, 18 to 32 VDC allowed, Positive, Negative, GND; Current Load: 500 mA max @ 32 VDC max; Operating Temp -4° F to 122° F (-20° C to 50° C); Storage Temp -40° F to 185° F (-40° C to 85° C); LED Indicators; Configuration: Serial Port DB-9M RS-232 only; No hardware handshaking; Ethernet Port: (Ethernet modules only) 10Base-T half duplex RJ45; ConnectorLink and Activity LED indicators; Electrical Isolation: 1500 V RMS at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991; Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration; Application Ports: Modbus Plus Connector, Two DB9 Female Standard Modbus Plus connectors; Serial Port Isolation 2500 V RMS port signal isolation per UL 1577 3000 VDC min. port to ground and port to logic power isolation