Stand-alone DIN-rail mounted protocol gateway with one Ethernet port and one Remote I/O port. The Modbus TCP driver can interface many different protocols into Schneider Electric Quantum processors as well other solutions supporting the protocol. Supports both Client and Server connections; When coupled with the Web option provides a web/ftp interface as well. The RIO interface is an adapter (server) that can be connected to a scanner (client) that controls the data transfer. Also supports limited high-speed data transfer via the Input and Output images.
Ideal solution for the many applications where Modbus TCP connectivity can be used to integrate a Remote I/O device into a system; The Modbus TCP gateway is a powerful module designed with both Client and Server support, enabling connection to other Modbus devices (Modicon processors and many others); In combination with the Remote I/O device support, provides a powerful interface to many Remote I/O devices in use today; Used in Manufacturing, Oil and Gas, Electrical Power and Food Processing.
Power Supply 24 VDC nominal 18 to 32 VDC allowed Positive, Negative, GND Terminals 2.5 mm screwdriver blade;Current Load 500 mA max @ 32 VDC max;Operating Temperature -4° F to 122° F (-20° C to 50° C);Storage Temperature -40° F to 185° F (-40° C to 85° C);LED Indicators;Configuration Serial Port DB-9M RS-232 onlyNo hardware handshaking;Ethernet Port (Ethernet modules only)10Base-T half duplex RJ45 ConnectorLink and Activity LED indicators Electrical Isolation 1500 V RMS at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration;Application Ports Modbus Plus Connector Two DB9 Female Standard Modbus Plus connectors;Serial Port Isolation 2500 V RMS port signal isolation per UL 1577 3000 VDC min. port to ground and port to logic power isolation