The Totalflow FLO 6213 is a little sibling to the XFC (eXtendable Flow Computer) and XRC (eXtendable Remote Controller). The FLO 6213 is an accurate and reliable single tube orifice gas flow computer with the capability to measure and monitor gas flow in compliance with AGA and API standards. This unit is supplied with an Integral Multivariable Transducer to measure differential pressure, static pressure and temperature from a single differential pressure meter run. Multiple protocols, including several versions of modbus, are supported.
Low power consumption; Dual level security code data protection; Monitors user limits for alarming; 40+ days historical records; Event log defaults to 200 events (user configurable); Complies with API 21.1 standard for custody transfer devices; Flow and energy calculations per AGA 3-85, AGA 3-92, AGA 7; Super compressibility calculations per NX-19 or AGA 8-92 Gross or Detail method; Smart (temperature and pressure compensated) integral, factory calibrated, multivariable transducer; Selectable 3 or 5 point calibration; Programmable DP zero cut-off; 100 ohm platinum RTD; Software selectable (RS232/RS485/RS422) port Class I, Division 2 Groups C and D, F.M. and CSA Hazardous Area Classifications; Advanced embedded data logger; Programmable alarm filtering and exception reporting capability; Protocol options include Modbus; User programmable Modbus register maps; User programmable math and logic sequences.
Aluminum enclosure, powder coated; Dimensions: 12.756" W, 17.23" H, 10.269" D; Rechargeable lead acid batteries; Solar, AC or DC charging options; Max Battery Capacity: 26 AH; Designed to meet CSA/NRTL Class 1, Division 2, Groups C & D hazardous area classification; Mounting: Wall, pipe or direct; Power: 12 VDC; Charger: Solar or 16-18 VDC; Comm Ports: 1 - dedicated - PCCU (local configuration port), 1 - RS232, RS485 or RS422; LCD Interface: 2 X 24 (LCD; Security Switch: Dual-level security switch on-board