The 5303-MBP-MNET stand-alone DIN-rail mounted protocol gateway provides one Modbus Plus configurable DB9F port and one Ethernet port. Supports both Client and Server implementations of the protocol on the DB9 Female Modbus Plus port. The Modbus Plus port is fully configurable. The Modbus TCP protocol driver can interface many different protocols into Schneider Electric Quantum processors as well other devices supporting the protocol. The MNET driver supports Client and Server connections, and when coupled with the Web option also provides a web/ftp interface.
Designed with both Client and Server support; Easy connection to other Modbus devices (Modicon processors and many others); In combination with the Modbus Plus support, the module provides an interface to many Modbus Plus devices; Powerful interface to the many Modbus Plus devices in use in the industrial marketplace today; Applications found in most industries, especially Manufacturing, Oil and Gas, Electrical Power and Food Processing.
Power Supply: 24 VDC nominal, 18 to 32 VDC allowed, Positive, Negative, GND;Current Load: 500 mA max @ 32 VDC max; Operating Temp -4° F to 122° F (-20° C to 50° C); Storage Temp -40° F to 185° F (-40° C to 85° C); LED Indicators; Configuration Serial Port: DB-9M RS-232 only; No hardware handshaking; Ethernet Port (Ethernet modules only): 10Base-T half duplex RJ45 Connector; Link and Activity LED indicators; Electrical Isolation: 1500 V RMS at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991; Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration; Application Ports: Modbus Plus Connector Two DB9 Female Standard Modbus Plus connectors;Serial Port Isolation: 2500 V RMS port signal isolation per UL 1577 3000 VDC min. port to ground and port to logic power isolation