Back to Company
The FieldServer Kohler 550 Adapter for LonWorks? is a protocol translator/gateway enabling the Kohler Generator Controller to communicate with LonWorks ? devices and networks. The FieldServer connects the Kohler to a LonWorks? network through the Modbus RTU protocol. The FieldServer allows status points to be read and the generator to be enabled to the LonWorks ? network. The Adapter is connected to the LonWorks ? Network by being commissioned into the network using a Network Management tool (i.e., LonMaker or equivalent package).
In a single, comprehensive
package the FieldServer provides the hardware and software necessary for the translation. In addition to the
LONWORKS? connector and the serial port, the FS-B2011 includes an Ethernet (10baseT) connector. Configuration
files can be downloaded via the serial or Ethernet port. All the necessary software and instructions for configuration
are provided with the FieldServer.
See attached spec. sheet.
Copyright © 2005-2020 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor