Back to Company
Software - Device Driver
A communications interface solution for Modbus serial devices
The Modbus RTU driver allows the FieldServer to transfer data to and from devices over either
RS-232 or RS-485 using Modbus RTU protocol. The FieldServer is capable of being used as a
port expander. The FieldServer can emulate either a Server or Client. The FieldServer is capable of supporting
devices that use two Modbus Registers to transfer IEEE floating point format.
See attached spec. sheet.
Copyright © 2005-2020 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor