Back to Company
The TEMP (Temperature Evaluation and Monitoring Product-line) is based on a monolithic digital temperature sensor which can monitor and transmit temperature data from up to 10 individual points (i.e., 10 individual sensors). Individual calibration coefficients for sensors are stored in the onboard microcontroller?s Flash EEPROM.
High accuracy and resolution (TEMP Technology); Inherently digital (CMOS/TTL compatible) electronics; Resolution of 0.1 C; Digitally trimmed calibration at 0 C and 25 C with calibration coeffs. Stored in Flash EEPROM; Accuracy of +/-0.25 C(-25 to 50 C); Microcontroller VDD MUX for individual sensors to minimize self heating inaccuracies; On board microcontroller provides output in real world units (10Hz/C); F readout (10Hz/F) available on request; Immunity to hostile environment; High survivability to blasts and vibration; Easy to install and maintain; Arrives on site fully assembled; Low-cost readout unit and telemetry? DESTINY (Digitally Enabled Sensor Transducer and Instrumentation Network from YieldPoint); PalmOS using SensorSYNC; Easy to interface with PLCs using Modbus protocol.
See attached spec. sheet.
Copyright © 2005-2020 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor