The ADMNET-MCM module is a solution for many applications where Ethernet and serial connectivity need to be added to a Modbus Client/Serve platform. The ADM API Suite is allows software developers access to the top layer of the serial ports. The ADMNET API suite accesses the Ethernet port.
MNET-MCM modules are a solution for the many applications where Modbus TCP connectivity can be used to integrate Modbus Master/Slave serial devices into a system; The Modbus TCP gateway is a powerful module designed with both Client and Server support, enabling easy connection to other Modbus TCP Devices (Modicon processors and many others); In combination with Modbus Master/Slave device support, the module provides a powerful interface to the many Modbus devices available in the marketplace today; Applications for the module are found in Manufacturing, Oil and Gas, Electrical Power and Food Processing.
Power Supply 24 VDC nominal 18 to 32 VDC allowed Positive, Negative, GND Terminals 2.5 mm screwdriver blade; Current Load 500 mA max @ 32 VDC max; Operating Temp -4° F to 122° F (-20° C to 50° C); Storage Temp -40° F to 185° F (-40° C to 85° C); LED Indicators; Configuration Serial Port DB-9M RS-232 only; No hardware handshaking; Ethernet Port (Ethernet modules only) 10Base-T half duplex RJ45 ConnectorLink and Activity LED indicators; Electrical Isolation 1500 V RMS at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration; Application Ports Modbus Plus Connector Two DB9 Female Standard Modbus Plus connectors; Serial Port Isolation 2500 V RMS port signal isolation per UL 1577 3000 VDC min. port to ground and port to logic power isolation