Modbus Organization

Advantages of Joining | Join Form | Toolkit | Subscribe to Newsletter

Text Size: smallmediumlarge
 Back to Company



EtherMeter (Model EM-100)

Type:  I/O Module
Description:  A flow meter interface for SCADA, Telemetry, and Building Automation Systems: The EtherMeter is an industrial protocol translator built to work with encoder-type and pulse-type flow meters -- especially water, gas, and petroleum meters. On the automation side, it communicates using Modbus (RTU/ASCII/TCP), DF1, and EtherNet/IP. On the meter side, it is compatible with water, natural gas, and petroleum meters from Sensus, Neptune, Badger, Itron, Elster-AMCO, Kent, ABB, Hersey, Master Meter, Siemens, plus most pulse-based meters. When the EtherMeter is used with AMR protocol-enabled meters, it eliminates the totalization errors that can plague pulse-based meter-reading techniques. Target applications include water plants, pumping stations, master meter stations, automated buildings, and commercial sub-metering.
Connectivity:  Modbus RTU, Modbus ASCII, Modbus TCP
Features:  Compatible with flow meters from most manufacturers; Collects and reports both totalization (total consumption) and flow rate data; 2x16 LCD display with backlight; Integrated web and telnet servers.
Specifications:  2 Meter input channels supporting the following protocols: Sensus protocol, Neptune protocol, Elster protocol, Pulse. SCADA Connectivity: RS-232, RS-485, Ethernet. Required Power: 10-36VDC, 2.5 W Max. Two Auxiliary Analog Inputs. Three Auxiliary Digital I/O. Dimensions: 8.25" x 4.75" x 1.75". Din-Rail mountable. Integrated TVSS diodes. Fused. Safety Standards: UL-60950-1 (USA/Mexico), CSA C22.2 No. 60950-1 (Canada).